• banner


Mini Appearance And Long Distance 656ft. Wireless Video Transmission System

▪ Wireless video transmission system-WTS200
▪ Mini and compact design to carry easily
▪ Up to 656 feet line of sight range
▪ Low latency, can penetrate obstacles for transmission
▪ Multiple choices of power supply




Connect Diagram


Product Tags


The WTS200 wireless video transmission system is a new affordable HDMI wireless video system which can support 4K(3840*2160P)@30Hz. The WTS200 has a range of 656 feet line of sight range with transmission that can accomplish less than 100ms latency. It supports Battery, Power Bank, Adapter to charge. A fully charged 660mAh battery can power either the receiver or transmitter continuously for up to 4 hours. 

The WTS200 transmitter has dual HDMI Ports, one HDMI input and HDMI loop out for audio and video signals. However, the WTS200 receiver has one HDMI ports that can output both audio and video to two monitors at once. Dual antenna design significantly improves the quality and stability of a wireless link. The mini and fashion metal alloy material design allows the WTS200 to carry easily and be used in multiple situations. Such as outdoor scene shooting, wedding live broadcast, network anchor etc. 

In the process of film and television shooting, traditional wiring has always been a major problem that troubled the production, such as the distance between the camera and the display terminal is long, the wiring is messy, people step on, the scene environment is complex, wiring accidents are often prone to occur, which can affect the smooth filming of movies and televisions. Especially in some live broadcast occasions, live broadcast accidents are more likely to be caused. The WTS200 wireless video transmission system can circumvent these problems very well. The
use of wireless image transmission equipment for Ultra-high-definitions video transmission in daily shooting has become a trend, and its application in the film and television circle is increasingly widespread. Meanwhile, the WTS200 has strong wall penetration ability and sends ultra high definition 4K@30Hz HDMI signal to the monitor with low latency. 


HDMI loop out on transmitter

Support OLED display control and key operation

Dual-antennas design gets a more fluent and stable video

RJ45 ports is suitable for IP camera input and computer RTSP decoding and playback


Source with HDMI input

Display with HDMI output


1.HDMI Transmitter X 1pc

2.HDMI Receiver X 1pc

3.Type-C Power Adapter X 2pcs

4.5G Band Antenna X 4pcs

5.User Manual X 1pc

  • Previous:
  • Next:

  • QQ图片20201216135036

    Model WTS200
    CPU ARM A7 (dual core 1.3G); DRAM 4Gb x 2; SPI ROM 32Mb
    Frequency 5.1~5.8GHz
    Wireless bandwidth 20MHz
    Available channels 22
    Transmit power 22dBm/MCS7
    Receiving sensitivity -74dBm/MCS7
    Antenna channel 4T4R MIMO
    Antenna gain 5dBi external 0°-20°
    Antenna interface SMAx4 20°-180°
    Transmission distance 200m
    HDMI input Resolution support (4K30/24Hz, 1080P60/50/30/25/24HZ, 1080I60/50HZ, 720P60/50HZ)
    3G-SDI input Resolution support (1080P60/50/30/25/24HZ, 1080I60/50HZ, 720P60/50HZ, etc.)
    RJ45 input Suitable for IP cameras
    Encoding mode H.264/H.265
    HDMI output Resolution support (4K30/24HZ, 1080P60/50/30/25/24HZ, 1080I60/50HZ, 720P60/50H, etc.)
    3G-SDI output Resolution support (1080P60/50/30/25/24HZ, 1080I60/50HZ, 720P60/50HZ, etc.)
    RJ45 output Suitable for computer RTSP decoding and playback
    Decoding mode H.264/H.265
    Audio sampling rate PCM 48K16Bit


  • Write your message here and send it to us